While Digitizing Letters, Here Are 4 Vital Things To Take Into Account

As we’re talking about digitization, this miracle of stretching ensigns requires proper alignment and perfection especially when it contains letters. It becomes more grueling for digitizers to embroider letters by keeping the different sizes and heights of letters into consideration. Although it seems relatively easy to digitize letters you got swamped indeed with the smallest mark. Because it isn’t delicate to spot the mistake as everyone knows what letters actually look like. You need to be more watchful in digitizing letters in order not to lose quality.

Then are the following four factors you should consider that help you in making your letter digitization process fairly smooth and grabs the attention of your target followership.

  • Consider the size, range, and height of letters
  • Avoid using twisted, crooked, or fancy words
  • Applicable viscosity
  • Underlay duly

Now we will give you one by one illustration of each step in detail.

Size, Width, Height

When digitizing letters, size matters. It’s always recommended that your letter size shouldn’t be lower than a quarter inch. Along with size, the range of the column aches is also important in Embroidery digitizing.

There are a many points that you need to keep in mind for making your letters unique and readable by your followership.

Range of Letters

Let’s consider, the periphery of your needle is 1 nm, which would be the minimal range for a satin sew.

range distance between letters intends to be0.8- 1 mm.

Size of Needle and Thread

The size of the needle used should be small for digitizing small letter words with spare thread. You aren’t suitable to produce a satin sew that’s narrower than the needle used to produce that stich to avoid any accord on quality. You’re advised to use a 40- weight thread with a75/11 needle for digitizing small letter systems. You can change that criteria to a70/10 needle with 60weight thread( 25 lower thick as compared to thread 40) by using advanced point technologies depending upon the complexity of your design.

Height of Letters

For some systems, you may underestimate the range, also the height is a high factor to dissect. For illustration, if you apply a specialized rule as a thumb rule, as you’re going to digitize letters that may contain one or further ABC, also the height of capital letters should be 4 mm.

In case of further than one ABC, each letter should be 5 mm in height.

Avoid Using Curved/ Twisted/ Serif Letters

It’s delicate to deal with letters having variable- range columns. It might be parlous for you to maintain the radiance while digitizing serif or small letters. Serif is principally a line on the upper or lower ends of strokes of letters. Especially when you need to digitize on a narrower space, it looks messy and you may lose quality. Always prioritize simplified words over those letters having twisted edges for digitization.

There are numerous free sources available, you can choose according to your design. Because your preference is linked to the time you invest in this design and it’ll decide whether to enhance or lower the quality of your work.

Applicable viscosity of sew and Fabric

“ Distance between aches refers to viscosity in terms of embroidery. ”

For illustration, the advanced the viscosity, the further aches are together. You need to be more careful when you try to compress too numerous aches over a small face. Both extremely high and low viscosity can be problematic, thread breaks, puckering, holes in fabrics, poor quality designs, and numerous further.

Another important factor is considering that the sew viscosity must be analogous to that of fabric viscosity used for digitizing. High- viscosity sew on featherlight fabric results in gimmick edges of the digitizing letters.

Certain ABC has closed loops similar as o, p, q, etc. These rudiments bear low- viscosity aches in order to digitize in a good manner. The standard criteria of compass for the unrestricted spiraled space are0.45 mm.

So it’s veritably important to diagnose the viscosity issues. viscosity should be set meet according to design when digitizing letters.

Proper Underlay

Underlay provides a base for the letters to digitize duly and a foundation for cover aches. In embroidery, its functions are analogous to the shell system of humans. Underlay provides a garret that raises the cover sew when dealing with soft fabric. The most familiar types of underlay are

  • Edge Run underlay( run along the edge of a letter)
  • Center Run underlay( go down through the column)

Edge run underlay isn’t supposed to support the digitizing of small letters. occasionally you use the aches that move on fabric for the handwriting also serves the function of underlay. This is important to know whether to use the right underlay. It’ll only be possible when you got enough experience with the passage of time. For illustration, by applying the thumb rule

  • Letters with heights under 5 mm shouldn’t have underlay.
  • Center run underlay is applied on letters with height ranges between 6- 10 mm.
  • Letters with a height of further than 10 mm also are enough for applying edge run underlay.

So these are a couple of points you should consider when digitizing letters in order to avoid any chain in the smooth process of digitizing. also you’ll leave a important print on your followership due to high- quality work.


Digitizing letters isn’t an easy task. veritably little negligence can make a big difference. For making your letters looks unique avoid using crimpy or crooked letters in your Embroidery digitizing services that will be delicate to read by your followership. Letters are hard to digitize on fabrics similar as jackets etc. It requires different changes of viscosity and bore as compared to the soft fabric. Only experts know the right use of these crucial factors for producing high- quality letters. Hopefully, this composition helps you to figure out the stylish way when you’re going to perform handwriting.

Leave a Reply

Your email address will not be published.