Most common questions about parking lot striping


If you’re thinking of installing parking lot striping, there are a few things that you should know. First, let’s talk about the common questions people have about how to stripe a parking lot or what kind of material is best for this job. Then we’ll get into some details about applying your logo and other considerations in this space.

What’s the best material for parking lot striping?

If you’re looking for the best material for parking lot striping, there are a few things to consider. First and foremost, it’s important that your material be durable enough to last through the winter. This can be tricky because some materials shrink or expand with temperature changes. Some even start cracking when exposed to extreme heat or cold!

Second, you’ll need something that is easy on your eyes—and doesn’t stain them! Plastic is usually a good choice here because it won’t leave behind any unsightly streaks or smears in traffic light colors (like red). Metal is another popular choice because it doesn’t flake off too easily like asphalt does during rainstorms; however metal tends not blend well with other colors so you may want black instead if this applies.[1] Finally: remember how we said above? “If possible use two different colors?” That’s right – when choosing between one option vs another depending upon which one lasts longest beforehand.”

How much does it cost to stripe a parking lot?

How much does it cost to stripe a parking lot?

The answer to this question depends on the size of your lot, as well as what type of material you use, what parking lot striping companies dallas you are considering and how complex your design is. If you’re starting from scratch, there are several factors that can affect your final price. First off, let’s look at the big picture: How much does it cost per square foot? The average price for lots that have been striped in white paint ranges from $1-$2 per square foot depending on where they’re located (Washington D.C., for example). If you have stone or brick pavers instead of asphalt or concrete (or if there are multiple colors or patterns), then expect an increase in cost because each color must be applied separately before being combined into one layer; this process takes more time than applying just one color at once!

Next comes material cost: Are we using asphalt or concrete? Is our base coat going over existing asphalt so that we don’t need additional leveling results afterward?” These factors will influence how much money gets spent during construction phases.”

Does it cost more to stripe a large parking lot?

The answer is yes and no. If you have a large parking lot, it will take longer to stripe than if you have a smaller one. However, the cost per square foot is usually less for larger lots because there’s more material involved. There are also other factors that contribute to how much it costs and when they come into play:

  • Labor costs – The amount of labor required depends on the size of your parking lot and how much work has been done in the past by other contractors or employees at your company who were not directly involved in this project (and thus had no knowledge about how many different types of paint were used). This can vary widely depending on whether or not there was prior experience with painting stripes on asphalt surfaces before hand—and if so whether those workers did their job correctly!
  • Materials used – Different types of materials need different amounts of prep work before applying them onto asphalt surfaces such as tar removal (if needed), grinding down any surface imperfections like cracks or bumps etcetera…

Does the size of the parking lot affect how long it takes to stripe?

No, not really. The size of your parking lot doesn’t affect how long it will take to stripe.

The main reason is because there are many factors that contribute to the total amount of time required for striping:

  • The number of lines in the pattern;
  • How many intersections exist between those lines; and
  • How many intersections exist between each intersection and its neighbors (if any).

When should parking lots be striped and re-striped?

When should parking lots be striped and re-striped?

  • Striping should be done when the pavement is dry. If you see water or ice on your parking lot, then there’s a good chance that it hasn’t been properly sealed yet. This could lead to flagging problems later on down the road if you have enough moisture in there for this process to happen again—so make sure that these areas are dry before beginning any work!
  • Striping should also be done when temperatures are above 50 degrees F (or 10 degrees C). The warmer temperatures help prevent cracking caused by expansion due to heating up of asphalt materials during summer months when they’re exposed directly under sunlight hours long each day while parked outside all night long too.”

How should new construction or layout changes be reflected in parking lot striping?

If you are planning to add new parking spaces or adjust existing ones, it’s important that the striping be updated in a way that reflects what’s happening on-site. This can be done at any time during construction or after it’s finished. It’s also possible to do this during normal business hours if necessary.

If you have questions about whether your project will require additional striping, please contact our office at [phone number].

Is there a difference between installing lines in asphalt vs. concrete?

Asphalt parking lot lines are typically installed in concrete. This can be done because asphalt has a higher durability than concrete, and if you’re installing your parking lot lines on top of existing ones, you’ll want something that’s more durable.

But there is also an aesthetic benefit to using asphalt instead of concrete: it’s easier to work with! If you’re planning on installing new lines or correcting any mistakes while working with them later on down the road (and trust me—that happens), then there might be some extra labor involved since concrete requires more preparation before it can get paved; meanwhile, asphalt doesn’t require any special prep work at all! So unless your project requires extra effort from yourself or other workers (like if they need help carrying heavy equipment), then choosing this option will save time in addition to costing less money overall due to its cheaper price tag compared with concrete.*

Are there any disadvantages to using waterborne paint instead of oil-based paint?

Waterborne paint is a more environmentally friendly option. It can be used in cooler temperatures and doesn’t require the use of solvents, which makes it safer for workers on-site. Waterborne paints also tend to be more durable than oil-based products, resulting in less maintenance over time.

Waterborne paint costs less than its oil-based counterpart because it requires less storage space and does not require the same amount of preparation before application. In addition, because waterborne paints are thinner than their non-waterborne counterparts (i.e., oil), they’re easier to apply using airless sprayers or high pressure sprayers like Low Volume Spraying (LVSP).

Does it matter if the pavement is wet when your crew shows up to stripe the parking lot?

While it’s true that some contractors will stripe a parking lot when the asphalt is wet, we recommend waiting until the pavement dries before you begin. This is because heavy traffic and rain can wear down your equipment and make it more likely that damage will occur. For example, if you’re using pressure rollers on a wet surface, they may not be able to reach all areas of the parking lot at once; this means that some spots might be missed or appear unevenly painted.

When applying striping paint in wet weather conditions (especially by hand), there are several things to keep in mind:

  • Keep an eye out for how fast coats dry; try not to let them sit too long before applying another one!

Can you apply my company logo to a parking lot? How big can you make it, and will it look good?

You can apply your company logo to a parking lot by using it as an overlay on the asphalt surface. The size of the logo depends on how big your parking lot is, and also whether or not you want to make it bigger than what already exists. If you have a small lot, then choosing something small will look great; if you have a larger one, then go with something bigger.

If you’re unsure about how large your company logo should be, consult with an expert who knows about this kind of thing! There are many professionals out there who specialize in these kinds of things—they may even be willing to help with this project for free if necessary (but we recommend not doing so).

You have questions about striping. We have answers.

If you have questions about parking lot striping, we can help. We’re the experts in this area and can provide answers to all of your needs. Our staff is trained to answer any concerns that you may have and we are available 24/7 if necessary.


We hope this article answered all of your questions about parking lot striping. If you have any further questions, please contact us so we can help! We’re here to make sure that every job is done right and in a timely fashion.

Leave a Reply

Your email address will not be published.