How to Get the Steps to Connect HP Envy 5055 to Wi-Fi

Are you a recent owner of the HP Envy 555? Not sure how to connect it? If you answered yes to the questions above, then you are on the correct page. We’re here to answer your questions about the HP Envy 5555. This wireless printer can easily connect to your smartphone, computer, tablet, or laptop via Bluetooth.

There are many applications that can be used to configure wireless connections for the HP Envy 5055. This procedure is applicable to both Windows and Mac devices.

HP Envy 5055 Setup for Windows

You can connect wirelessly to any Windows device using various methods, including built-in Wi-Fi, HP Auto Wireless Connect, and HP Wireless Direct. These steps must be followed carefully and in the correct order.

  • Click the Start menu to access your computer’s settings and select the control panel.
  • Go to the settings menu by going to the control panel. Check that the printer is turned on. Scroll down to select Wireless Settings.
  • Press and hold the HP Envy 5055 Wi-Fi Setup Wizard for a few seconds. This wizard will enable the printer’s WiFi.
  • After the setup is complete, it will begin searching for available networks. This list will be displayed on the printer’s LED display.
  • Turn on the network router associated with a wireless connection. If the automatic connection option has been enabled, the printer will automatically connect to your wireless network.
  • However, in case auto-correction mode has been disabled, the list of all available networks will be displayed on the panel.
  • To select the network you want, you will need to read the entire list. To establish the connection, you will need to enter your password / passphrase or security PIN after selecting the network.
  • Once the connection has been successfully established, you will see a message on the printer screen stating that the connection was successful and that the printer can now be used to print jobs. The wireless light will turn blue on your printer.

HP Envy 5055 Wireless Setup on Mac

It is recommended that Mac devices use the AirPrint feature, or the built-in wireless feature, to connect your HP Envy5055 printer to Mac over a wireless network. Below are the steps to do this:

  • Turn on your HP printer to enable the wireless function. Touch the Wi-Fi icon on the control panel to activate the wireless function.
  • Turn on your wireless router now and make sure it is connected to the wireless access point.
  • Next, make sure the access point settings are open for HP Envy 5055 Paper Jam. Also, make sure there is an active, strong and stable internet connection.
  • You will now need to enable Wi-Fi on your Mac device. Confirm that the printer has connected to the same wireless network as your printer.
  • HP Wireless Direct is another option. You will need to disconnect all USB cables from your printer to use this method. You also need to make sure that your internet connection is stable and active.
  • Go to the settings section of the control panel. Navigate to it and then click on the wireless settings tab. Now enable Wi-Fi Direct from your HP printer.
  • Next, enable the wireless option on your Mac system. You will need to wait for the devices to connect.

Leave a Reply

Your email address will not be published.